The Atlas® Platinum PVL14OF-EXT is a four post commercial grade Open-Front Alignment lift with 14,000 pounds of lift capacity, designed with the professional shop in mind. This lift has extra long runways and can accommodate a variety of cars, vans, SUVs, trucks, and commercial vehicles.
The Open-Front design allows better access to the underside of vehicles during use. The AP-PVL14OF-EXT features built in slip plates and a pair of heavy duty turntables so the user can do wheel alignments.
The Platinum PVL14OF-EXT uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.
The Atlas® Platinum PVL14OF-EXT features “tracks” between the runways to allow the use of a rolling bridge jack (recommended is the Atlas® Platinum RJ7000) on the lift. Rolling jacks sold separately.
The Atlas® Platinum PVL14OF-EXT is also ALI certified and backed by one of the industry’s best warranties for an added peace of mind.
This product features an ALLY Hydraulic AL3000 Power Unit. This premium power unit is certified by MET Laboratories Inc. for electrical compliance in the United States and Canada.
Extra heavy-duty armatures and more motor windings with increased silver metal included in the wires and connections create far less heat generation and allow ALLY Hydraulic power units to maintain constant torque through the lifting process. This power unit also carries an industry leading two-year limited warranty.
Features & Benefits
- ALI Certified Lift
- 14,000 lb. Capacity
- Heavy Duty, Commercial Grade
- Alignment Lift, Includes Built in Slip Plates & Turntables
- Open Front Design for Better Access
- Extra Long Runways
- Adjustable Lock Ladder Design
- Higher Quality Powder Coat Finish
- Air Operated Single Point Lock Release (External Air Supply Required)
- Lock Ladder Design
- Double Lock Safety System
- Powder Coat Finish
- Steel Approach Ramps Included
- Mounting Hardware Included
- Standard with Premium ALLY Powerunit
- 220volt/1phase Electric Operation (Requires a 30amp Breaker)
- 5 yr Structural – 2 yr Hydraulic – 2 yr Powerunit Warranty
Atlas® Platinum PVL14OF-EXT Specifications
||73 1/4" (6' 1 1/4")
|Overall Width Of Columns (Without Motor)
||140 1/8" (11' 8 1/8")
|Overall Width Of Columns (With Motor)
||148 3/4" (12' 4 3/4")
Overall Length With Approach Ramp
|272 1/8" (22' 8 1/8")
|Length Between Columns
||207" (17' 3")
||223 1/2" (18' 7 1/2")
|Thickness Of Runway
|Width Between Runways
||42 3/4" (w/ Rail 39 1/4")
|Outside Runway To Outside Runway
||83 1/8" (6' 11 1/8")
|Clearance Under Runways
||66 1/4" (5' 6 1/4")
|Clearance Between Columns
||116 3/8" (9' 8 3/8")
|Height Of Columns
||92 1/2" (7' 8 1/2") Rear/109 1/4" (9' 1 1/4") Front
|Maximum Wheel Base
||203" (16' 11")
||94 1/2" (7' 10 1/2")
85-115 PSI (EXTERNAL AIR SUPPLY REQUIRED)
220 volt single (1) phase.
A 30 amp breaker is recommended
AW32/AW46 (NOT INCLUDED)
Requires a minimum of 6" of concrete with a 3000 psi. rating
HOW DO I GET MY STUFF OFF THE TRUCK?
Most truck shipments will be delivered by a commercial freight carrier operating a tractor/trailer rig. Your product will be inside an enclosed trailer. Many commercial carriers have smaller straight trucks, but most freight companies will not use these smaller trucks for your delivery of a large item. Atlas Automotive Equipment cannot guarantee the size of truck that will be used for your delivery. You should assume that your product will be delivered on a tractor/trailer rig that uses a 53-foot enclosed trailer. This is a VERY LONG rig. The shipping companies and its drivers will do everything they can to ensure Atlas lifts are loaded as close to the tail of the trailer as possible, however you MUST have equipment such as a forklift, bobcat, skid steer, or “roll-back” wrecker truck to safely unload any Atlas Automotive Equipment lift.
Please read the following if you have ANY QUESTIONS about truck freight delivery.
Atlas Automotive Equipment spends millions each year with freight companies. We are a very large truck freight customer and enjoy tremendous freight discounts that we pass along to our customers. Although we do everything we can to ensure the safe and timely arrival of your merchandise, there are certain things that we cannot and will not guarantee.
If you are having your product delivered to a friend or neighbor’s business and you will not be there when the product is unloaded, you (the customer) are still responsible for unloading the product and making sure that the product is not damaged. We spend a lot of time and money to properly package your product to protect it from damage during shipment. We attach several labels to your package designed to help ensure that those people handling your product take care not to damage anything. There are brightly colored (easy to read) labels reminding the customer (or whomever is unloading the product) to check for package damage. Please use some common sense and if you (or your designated unloading person) see damage to the outside of a package, then make a note on the delivery receipt (bill of lading) about the damage. Point out the damage to the truck driver and use your cell phone to take pictures of the damage.
We ship dozens of items every day via commercial carrier. We ship hundreds of smaller packages each week via UPS and Fed-Ex. There are times when packages get lost. There are times when product gets damaged. We label and package our products so that they should never be lost or damaged, but we cannot control the delivery process once the product leaves our warehouse.
DAMAGED OR LOST PRODUCTS
If a product is damaged or lost it first must be notated (on all copies) of the delivery receipt (also take pictures) it is also the customer’s responsibility to contact their sales rep immediately in order to have a freight claim filed with the freight company. Once freight is signed for free and clear it is now your property. As you can imagine, if you (the customer or the facility that unloaded your package) DID NOT make a note on the delivery receipt that the package was damaged, the chances of a freight claim being honored are very small. There is only one way for a customer to be 100% sure that his product will arrive undamaged, and that is if the customer (personally) picks up the merchandise from one of our brick-and-mortar locations. Shipping a product (no matter how well it is packaged) carries a small risk that the product may be lost or damaged. If you, (the customer) is not willing to take this slight risk, please pick up the product at one of our locations. We ship dozens of heavy products every day with great success. However, there is absolutely no way that Atlas Automotive Equipment can 100% guarantee that your product will arrive “perfectly”. If you have questions about freight shipping, please get them “asked and answered” BEFORE you place your order. Remember that even though your buddy down the street has a forklift and has offered to take delivery of your new lift, he still may not be “qualified” to inspect the package he unloads. It is NOT his lift and he will not take the time to make sure everything is 100% perfect. It is your job to make sure that he understands his responsibilities.
We attach caution and warning labels to many of our products that are shipped by common carrier (freight truck), to remind the customer to thoroughly inspect all packages before signing the delivery receipt. If there is damage, please note the damage on the delivery receipt.
CALLING AHEAD TO SCHEDULE A DELIVERY APPOINTMENT TIME:
The trucking company can call ahead (24-hour call-the day before delivery) to schedule the delivery of your product. This “call ahead” feature is offered free of charge by many freight lines (but not all). When the product arrives at the freight company’s nearest terminal (to your destination), the freight dispatcher will call to set up a delivery date and time at your location. It is important that the freight company has your cell phone or work phone number so that they can make immediate contact with you and not delay the delivery. Home phone numbers with answering machines may lead to days of frustration “playing telephone tag” with the freight company.
If your product is being delivered to a “legitimate” business (not a business that is located at a residence) that is open during normal business hours and has the facilities for unloading your product, then the “call ahead” feature is not necessary. The customer needs to understand that this “call ahead” feature will add one to three days of delivery time to the normal delivery time. (Assuming that the freight company is able to contact the customer very soon after the product arrives at their freight terminal)
The “call ahead” feature is needed if the product is being shipped to a residence (even if your business is located at your home) or to a legitimate business address that keeps unusual business hours. Many customers ask that the trucker call when he is 30 minutes away. This does not work. Atlas Automotive Equipment cannot guarantee the trucker has a cell phone…or will call you. It is the customer’s responsibility to work out the delivery arrangements with the freight dispatcher when customer is speaking with the freight company. If the customer has special needs or delivery instructions, that is the time to discuss and make those arrangements. Atlas Automotive Equipment does not own the delivery trucks or employ drivers for delivery.
LOCAL DELIVERY OF HEAVY ITEMS:
Many local customers want to take delivery of their products at their homes, but do not have the equipment to offload product from a semi-truck. There are many local delivery services that can provide this delivery service.
We recommend a “roll-back” wrecker truck for delivery of lifts to a home garage. The lift can be loaded on the truck at an Atlas Automotive Equipment warehouse, and the driver can “winch down” the lift from his inclined platform onto your garage floor or driveway. Atlas Automotive Equipment warehouses can make recommendations of certain delivery companies, or the customer may contact their own delivery service. There is a charge for delivery.
DELIVERY ADDRESS IN A PARKING LOT…NO WAY
Atlas Automotive Equipment must complete the freight bill of lading with a permanent delivery address that includes a street address. There is no street address such as: West end of the parking lot of Sam’s Club.
If a semitruck CANNOT get to your delivery address easily, it will not come. The customer must have a delivery address that allows a semi truck to enter and leave with ease. Neither dirt roads nor narrow 300 foot driveways will be acceptable. When the dispatcher calls to make delivery arrangements, the customer needs to inform the freight company of any potential delivery problems that may occur. Perhaps the customer can make arrangements to meet the truck on the highway or even in a parking lot, but those arrangements are to be made between the truck line and the customer. Atlas Automotive Equipment cannot make those special delivery arrangements when the customer places the order.
GUARANTEED DELIVERY TIME AND DATE…WE TRY…BUT NO WAY
Atlas Automotive Equipment cannot guarantee if a product is in stock at our warehouse. (If payment is received and truck lines pick up that day) We can give you an accurate ESTIMATE as to when you should receive your product, BUT we cannot guarantee certain delivery on that date. If you positively, absolutely must have a product on a certain day, either order two weeks early or get in a truck and visit one of our warehouses to pick up the product. Atlas Automotive Equipment does NOT reimburse for forklift rentals, nor do we compensate for missed deliveries or missed delivery appointments. Freight shipments are unique and therefore delivery appointments can be missed, requiring that a delivery appointment be rescheduled.
CUSTOMERS ARRANGING THEIR OWN FREIGHT PICK UP:
Atlas Automotive Equipment has the best shipping rates in the industry and passes these savings along to our customers. We do have a few customers that want to arrange their own shipping via common carrier. We can accommodate these requests; however, there are some issues that need to be discussed before a customer’s common carrier will be loaded. We can load a commercial carrier truck from 10:00 AM to 4:00 PM EST. The truck must have enough bed area available for the product purchased. Atlas Automotive Equipment will NOT rearrange packages inside a van or on a flatbed to make room for our product. This is a liability issue. We do not charge any loading fee for a customer pickup at our location. (Assuming the customer has arrived in a vehicle that allows us to load his product easily and safely.)
A customer arranged “Common Carrier” must furnish Atlas Automotive Equipment with a “BILL OF LADING” Many of our products need to be skid mounted or braced to prevent shipping damage. These extra packaging costs will be passed along to the customer. Skid costs are between $20 and $30. Metal bracing is normally $20-$30. These skids and braces must be used if the product is being loaded inside a semi-trailer. (To prevent damage to the product) The skids and braces DO NOT need to be used if the products are picked up in a pick-up truck, trailer, or similar mode of transportation. There are no extra packaging fees if our products are loaded on any of the above-mentioned vehicles. If the products (loaded in a semi-trailer) are NOT braced or skidded; YOU WILL NOT BE HAPPY WITH THE CONDITION OF THE PRODUCTS WHEN THEY ARRIVE. Skid and brace fees are always added to our quoted shipping costs. (When Atlas Automotive Equipment arranges the shipping)
HOW DO I UNLOAD THE TRUCK…I DON’T HAVE A FORKLIFT!
Many customers do not have access to loading docks and forklifts. We have assembled some photos of our products being unloaded with and without the aid of a forklift. Many of our freight carriers have power tailgates on their delivery trucks. There will be an extra charge of up to $150.00 for deliveries requiring the assistance of a power liftgate. The power tailgate is normally rated at 1000 LB. capacity. This is not enough capacity to unload most of our lifts. However, when used properly (and safely), the power tailgate (in conjunction with some common sense) allows the customer to off load many of our products without the use of a forklift.
IT TAKES A FORKLIFT (OR SIMILAR EQUIPMENT) TO UNLOAD A LIFT.
The trucker will not allow you and your friends to spend 30 minutes in the back of the truck taking the lift apart for a “hand unload”. Our two post and four post lifts are packaged in metal frames and require a forklift (or similar piece of equipment) to offload from the truck. The trucker is NOT going to let you and your buddies bring your toolboxes into the back of his truck to disassemble the lift frame and “hand unload” the lift piece by piece. Insurance regulations will not allow this.
The trucker has a schedule and cannot spend one hour at every stop to accommodate customers who are not prepared to offload their product. Once the lift is on the ground, the packing frame can be removed and each piece can be moved or loaded onto a trailer or pickup truck. Getting the lift to the ground is the main challenge. Now you can bribe your buddies to help assemble the lift!
SHIPPING TO A FREIGHT TERMINAL
Atlas Automotive Equipment enjoys great freight rates from many different freight carriers. These freight companies have hundreds of terminals located throughout the USA. If the customer has no way to unload the product at their home or business, the product may be shipped to a freight terminal for customer pick up. The customer and your sales rep will work together to find the closest freight terminal for the customer. Certain freight carriers are more experienced at transporting our longer lifts, and we will recommend those carriers if you purchase one of our longer four post lifts.
When the product arrives at the freight terminal, the freight dispatcher will call the customer to arrange pick up at the terminal. The freight terminals expect the product to be picked up within 48 hours of the notification call. All freight terminals have different operating hours and loading procedures. The customer may call the terminal in advance to ask about operating hours and loading procedures. In most instances, the freight terminal will load the product onto the customer’s trailer or pickup truck. Open trailers are much easier to load (and unload) than an enclosed trailer with a “beaver tail”. The freight terminal will require some type of positive identification before you can pick up your product.
Freight Shipping Policy
This item will be shipped by common carrier to a BUSINESS ADDRESS in the USA (lower 48 states).
A BUSINESS ADDRESS is defined as a delivery address on which there is no residential dwelling. Some small businesses are located on the same property as the owner’s home. These businesses would be classified as a RESIDENTIAL ADDRESS.
A FARM/RANCH would be considered a RESIDENTIAL ADDRESS. Limited access facilities (EG: schools, municipalities, county highway garages, storage facilities, military bases, prisons, etc.) will be subject to a delivery surcharge.
Rule of thumb about limited access facilities: If the driver must call ahead or pass through a security checkpoint to access the delivery area, then that delivery point will be classified a limited access facility. A freight surcharge will apply.
If you cannot locate a TRUE BUSINESS FACILITY that can receive your product, then please call us BEFORE you place your order to find out what will be the additional cost of the freight surcharge.
Atlas Automotive Equipment will make every effort to keep the additional RESIDENTIAL (and other non-business delivery addresses) surcharges to a minimum. These freight surcharges are dictated by the LTL shipping carrier and CANNOT “be waived” by Atlas Automotive Equipment. Please do NOT ASK for (or expect) FREIGHT if you cannot provide a “BONAFIDE” business location for delivery. Your product will arrive in an enclosed truck. It is the customer’s responsibility to provide enough space for a 53-foot tractor/trailer to access the business facility AND the customer is responsible for unloading the product. Freight does not apply to an address (whether business or residential) to where a freight truck cannot access. Due to the Weight of Items that are freight shipped a forklift (or something similar) is required to unload it.
The SHIPPING is valid ONLY to a legitimate commercial business address (not a home business address) that maintains normal business hours. There may be a truck freight terminal in your area that can receive the product and help load the product in your truck if you do not have a business address or the ability to offload the product.
Atlas Auto Equipment includes the following manufacturers warranty:
- 2 years on structural components.
- 1 year on air or electrical hydraulic power units, pneumatic power units, cylinders and major components from date of invoice.
- Wear items are covered by a 90 day warranty.
This LIMITED warranty policy does not include a labor warranty.
NOTE: ALL WARRANTY CLAIMS MUST BE PRE-APPROVED BY THE MANUFACTURER TO
The Manufacturer shall repair or replace at their option for this period those parts returned
to the factory freight prepaid, which prove after inspection to be defective. This warranty
will not apply unless the product is installed, used and maintained in accordance with the
Manufacturers installation, operation and maintenance instructions.
This warranty applies to the ORIGINAL purchaser only, and is non-transferable. The warranty
covers the products to be free of defects in material and workmanship but, does not cover normal maintenance or adjustments, damage or malfunction caused by: improper handling,
installation, abuse, misuse, negligence, carelessness of operation or normal wear and tear.
In addition, this warranty does not cover equipment when repairs or alterations have been made or attempted to the Manufacturer’s products.
THIS WARRANTY IS EXCLUSIVE AND IS LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED INCLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY OR ANY IMPLIED WARRANTY OF FITNESS FROM A PARTICULAR PURPOSE, AND ALL SUCH IMPLIED WARRANTIES
ARE EXPRESSLY EXCLUDED.
THE REMEDIES DESCRIBED ARE EXCLUSIVE AND IN NO EVENT SHALL THE MANUFACTURER,
NOR ANY SALES AGENT OR OTHER COMPANY AFFILIATED WITH IT OR THEM, BE LIABLE
FOR SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR THE BREACH OF OR DELAY
IN PERFORMANCE OF THIS WARRANTY. THIS INCLUDES, BUT IS NOT LIMITED TO, LOSS OF PROFIT, RENTAL OR SUBSTITUTE EQUIPMENT OR OTHER COMMERCIAL LOSS.
PRICES: Prices and specifi cations are subject to change without notice. All orders will be
invoiced at prices prevailing at time of shipment. Prices do not include any local, state or federal taxes.
RETURNS: Products may not be returned without prior written approval from the Manufacturer.
DUE TO THE COMPETITIVENESS OF THE SELLING PRICE OF THESE LIFTS, THIS WARRANTY
POLICY WILL BE STRICTLY ADMINISTERED AND ADHERED TO.